|
M14 Scope
Mount
Brand new 3rd. Generation scope mount for the M14, M-14, M 14,
M1A, M-1A, M 1A, and M-21 rifle. Standard weaver rail, as well as
being able to use the iron sights. Made by John Masen Co.
$45.00
Add to cart 
|
M-14
Leapers Scope Mount
Model: MNT-914
Mil-spec quality deluxe sniper mount for use with M14 rifles. One
piece machined from aircraft-grade aluminum alloy. Top rail
locks into the charger guide dovetail and the adjustable side screw
provides
a rock solid foundation for any high power sniper scopes. Accepts
Weaver style rings. Allows use of iron sight. Installs
easily,
no gun-smithing required.
|
M1 Carbine Scope
Mount
M1 Carbine Scope Mount. Mount installs easily with no drilling or
tapping and can be mounted on your rifle in less than 5 minutes. Mount
features a weaver rail and comes complete with Allen bolt and wrench.
$19.00
Add to cart
|
|
|
AK 47 SCOPE Mount
Model: MNT-970 Weaver Style Mount with Tactical Rings.
Designed for use with AK/MAK-90. Creative STABILIZER design of
the receiver cover to ensure locking and prevent rocking.
No interference with gun safety. Rings included for easy and
friendly installation. Optimum height/width clearance to fit all
popular scopes. It is also see thru so you can still use your
open sights.
|
SKS High Rise Scope
Mount
This mount replaces your rear reciever cover. Features hi-rise
scope rings, so you can still use your open sights. Lock down studs to
stop rocking of the mount. You may need to file the front
lightly to fit to your SKS. Made by Leapers
$18.00
Add to cart
|
Leapers AK
Tri-Rail Mount
1. One piece
integral
picatinny tri-rails attached to the receiver cover.
2. Accepts all varieties of scopes, tactical flashlights and lasers.
3. Comes complete with 1" weaver rings.
4. It is also see thru so you can
still use your open sights.
|
SKS Scout Rifle
Mount
This is a wonderful setup for your SKS. This gas tube
adds value to your rifle and makes it even more versatile. You can
match it up with our other pistol scopes for a broad range
of possibilities.
$29.00
Add to cart
|
NcStar AK47 Top Cover Tri Rail
Scope Mount
This is a top
cover scope mount for
your AK 47. It is a tri rail mount so you can mount a scope,
flashlight, laser etc. It weighs 9.8 oz. and is 9.85" long.
$20.00
Add to cart 
|
NcStar
SKS Weaver Tri Rail Mount
$24.00
Add to cart
|
|
Mini 14 Scope Mount
Weaver-Type Mounting Platform for your RUGER MINI-14 or MINI-30
Rifle. This mount will provide a Standard Weaver Rail which will allow
you to mount just about any Combination of Scope, Red-Dot, Night Vision
Device, ect. securely to your Mini-14 or Mini-30.
|
|
Mosin Nagant
Scope Mount
with bolt.
You get a mount and a
replacement bolt handle. You will need this handle to replace
your original bolt, because your origianal bolt will come up and hit
the scope unless replaced. If this is more than you want to
tackle, look at our scout scope mount for the Mosin. This mount system
is T-6 aluminum with a black anodized finish. The bolt handle is
polished stainless steel. Hardware and detailed instructions included.
Fits Round or octagonal recievers.
$39.00
Add to cart
|
Mosin Nagant
M44/ 91/30
Scope Mount
Scout rifle type mount for a Mosin Nagant M-44 Rifle. This replaces the
rear sight of your rifle allowing you to mount a pistol scope on the
barrel. Has a weaver base. These have been a real favorite. Fits
Chinese 53,
Russian, Polish, Romanian, and Hungarian M-44
M44 Scope
mount
$29.00
Add to cart
Mosin Nagant 91/30 Scope
Mount
$29.00
Add to cart
|
|
303 Enfield No1 Scope Mount
Fits .303 No.1, Mk. 3 (Does not fit .308) This .303 Enfield scope mount
is extremely stable and will hold zero. Black, T-6 aluminum. Great
hunting rifle. Install using weaver-type rings. No gunsmithing.
|
.303 Enfield No4 Scope Mount
Fits .303 No. 4, Mk. 1, 2, & 5. This .303 Enfield scope mount is
extremely stable and will hold zero. Black, T-6 aluminum. Great hunting
rifle. Install using weaver-type rings. No gunsmithing.
|
|
|
|
Fits large ring Mausers with
Standard
Bent Bolt (straight bolt or “wide-arc” bolt MUST convert to bent
using Bolt Handle). Minimal stock modification required for installation. No gunsmithing. Made of
black, anodized T-6 aluminum in USA.
|
Scope Mount fits large ring
7mm/8mm
Mausers with standard BENT bolt including German K-98, Czech
VZ-24, Yugo 24/47, Yugo 48/48A, and Turkish 1903/1937/1938/1946.
Mount will NOT fit
small ring Mausers (Spanish M1916 .308s) or Large-Ring Swedish
M38/M96 6.5x55mm.
|
| Part#MBH1800
Fits 7mm/8mm,
Large-ring, standard Bent-bolt,
Mauser 98s. Partial list includes German K-98s, Czech VZ-24s, Yugo
24/47s, Yugo 48/48As, Turkish 1903/1937/1938/1946s, etc... Will NOT fit straight bolt or "wide-arc"
bolt. Straight bolt or “wide-arc” bolt Mausers must convert to bent
bolt to use a rifle scope with part shown below. |
|
Mauser
Bolt Handle
#MBH1800
Converts straight bolt or “wide-arc” bolt to bent bolt handle to
allow use of a scope. Fits all Mausers. Includes drill, tap, hardware
and installation instructions. Made of stainless steel in the USA.
$14.49
Add to cart
|
|
Ruger
Mini-14 Ranch Rifle Scope
Mount Ring Adapter
This mount fits into the scope mount on your ranch rifle. The
mount converts the top of your mini into a weaver style rail. Letting
you mount weaver rings and not have to use the hard to get expensive
Ruger rings. Great for mounting large scopes and 30MM
scopes.
Comes with rings and allen wrench.
Black
$19.99
|
|
